Bản quyền © 2026 ROTER Fresh Air Technology Wuxi Co., Ltd. Mọi quyền được bảo lưu. Website Design by Wangke
The Commercial Air Conditioning Series consists of the digital intelligent fresh air purification system, modular air handling units, DX air conditioning units and condensing exhaust-air heat recovery fresh air units, covering a complete product range from purified fresh air and customised air handling to all-outdoor-air air conditioning, and can be combined into a complete solution according to building type and process requirements. The digital system uses separated liquid-circulation heat exchange, so supply and exhaust air are not mixed and the duct layout adapts to a wide range of distances; the casing is designed to purification grade with low air leakage, and the insulation structure reduces heating and cooling loss and condensation risk; standard analogue and communication interfaces are provided for stand-alone or central control and connection to building automation. Modular units use a modular casing and double-skin panels to allow free combination of mixing, filtration, cooling coil, heating, humidification, silencing, fan and heat recovery sections; dimensions can be adjusted to the plant room, air leakage meets the relevant national standards, and selection software can assist in determining air-state parameters. DX units need no chilled-water system, cooling tower, water pumps or plant room, and with RTR intelligent defrosting technology they can heat at low ambient temperatures without electric heaters; they are shipped in sections and assembled on site, suiting retrofits and projects with tight schedules. Condensing exhaust-air heat recovery units run on all outdoor air (direct-flow), recovering condensing heat from the exhaust; in winter, defrosting can normally be omitted, and free cooling with outdoor air is available in shoulder seasons. Across the series, air leakage is low, insulation is good and control interfaces are open, with sections and dimensions customised to the project.
Suitable for purified fresh air and air conditioning in hospital operating theatres, wards, outpatient areas and examination rooms; places with higher air-safety requirements such as drug testing institutes, disease control centres and biological laboratories; all-air systems in large public buildings such as office buildings, shopping malls, hotels, schools, airports and railway stations; industrial and process air conditioning in electronics plants, food workshops, printing and painting workshops; and special conditions such as laboratories, cleanrooms, corrosive exhaust, dust-laden exhaust and waste-heat recovery. In existing-building retrofits, DX or condensing exhaust-air heat recovery units can replace chilled-water systems and reduce the amount of plant room and piping modification; in new projects, modular units can be configured with the appropriate sections according to the required cleanliness class and temperature and humidity accuracy.