Các sản phẩm
  • Hệ thống lọc hút ẩm loại bỏ khói mù một luồng không khí trong lành

    Hệ thống lọc hút ẩm loại bỏ khói mù một luồng không khí trong lành

  • Hệ thống lọc hút ẩm loại bỏ khói mù dòng chảy kép thu hồi nhiệt hoàn toàn bằng không khí trong lành

    Hệ thống lọc hút ẩm loại bỏ khói mù dòng chảy kép thu hồi nhiệt hoàn toàn bằng không khí trong lành

  • Máy hút ẩm công nghiệp

    Máy hút ẩm công nghiệp

  • Máy hút ẩm gắn trần

    Máy hút ẩm gắn trần

  • Máy hút ẩm sấy khô

    Máy hút ẩm sấy khô

  • Máy hút ẩm loại đông lạnh nhiệt độ thấp

    Máy hút ẩm loại đông lạnh nhiệt độ thấp

  • Máy hút ẩm hầm rượu

    Máy hút ẩm hầm rượu

  • Đơn vị nhiệt độ và độ ẩm không đổi loại tủ

    Đơn vị nhiệt độ và độ ẩm không đổi loại tủ

  • Thiết bị hút ẩm không khí trong lành tất cả trong một

    Thiết bị hút ẩm không khí trong lành tất cả trong một

  • Máy hút ẩm bánh xe điểm sương thấp

    Máy hút ẩm bánh xe điểm sương thấp

  • Máy hút ẩm bánh xe kết hợp

    Máy hút ẩm bánh xe kết hợp

  • Bộ phận hút ẩm bánh xe phần

    Bộ phận hút ẩm bánh xe phần

  • Máy hút ẩm hút ẩm bánh xe nhỏ

    Máy hút ẩm hút ẩm bánh xe nhỏ

Desiccant Wheel, Industrial and Commercial Dehumidifiers

ROTER's dehumidifier series covers three quite different problems: holding a humidity band in a conditioned room, pulling air below the comfort range in a dry room, and removing moisture as part of an industrial drying process. The series includes wheel desiccant units, refrigeration-based units and combination units that handle both temperature and humidity in one package.

Wheel desiccant dehumidifiers

A desiccant wheel dehumidifier holds the rotor in a steady state by alternating between dehumidification and regeneration, so it can reach humidity levels a refrigeration unit cannot. The ROTER range runs from small units to low dew point units capable of going below 1% relative humidity.

  • Small wheel desiccant dehumidifier – a Swedish Proflute rotor rated for 10 years of continuous operation without failure, SCR constant-temperature control technology for stable long-run operation, low dew point dehumidification operation and PTC heating technology
  • Wheel-section wheel desiccant dehumidifier unit – contains only the rotor dehumidification section and typically runs together with other air handling units, connected by duct or flange
  • Combined wheel desiccant dehumidifier unit – runs on air conditioning chilled water or on a direct expansion refrigeration unit, and adds a surface heat exchanger so the supply air leaves at a stable condition
  • Low dew point wheel desiccant dehumidifier unit – a special unit structure that processes air to ultra-low humidity, down to below 1% relative humidity at minimum, for near absolute-dry states

Fresh air dehumidification and purification

Refrigeration and specialty units

Unit Designed for Scenarios
Ceiling-mounted dehumidifier Quiet ceiling installation in large spaces Villas, hotels, swimming pools, large warehouses, server rooms, pharmaceutical factories, workshops
Drying dehumidifier Heating and drying as part of a production process Food, chemical, pharmaceutical, paper, leather, wood and agricultural by-product processing
Low-temperature freeze-type dehumidifier Dehumidification at low temperatures without losing capacity Pharmaceutical cold-storage warehouses, cool-storage warehouses, cold-chain logistics, seed banks, electronics storage
Wine cellar dehumidifier Stable cellar humidity in LTCS-06, LTCS-10 and LTCS-13 models Wine cellars, electronics workshops, museums, server rooms, laboratories
Cabinet-type constant temperature and humidity unit Holding both temperature and humidity steady Laboratories, museums, archives, equipment rooms, production workshops, warehouses

Desiccant or refrigeration

Common dehumidification methods include refrigeration, compression, solid adsorption, liquid absorption and rotary desiccant. Refrigeration is the most economical below roughly 20°C and 60% relative humidity, but its capacity falls as the air gets colder and the coil ices up. Solid adsorption and liquid absorption handle low temperatures but consume more energy and need regeneration. The rotary desiccant method is not affected by temperature in the same way and can reach below 1% relative humidity, which is why it is specified for lithium battery, pharmaceutical and electronics production where the humidity control band keeps tightening.

Mẫu yêu cầu

Chúng tôi sẽ trả lời qua email trong vòng 24 giờ. Vui lòng giữ thông tin liên lạc của bạn có sẵn.