Các sản phẩm
  • Bộ trao đổi nhiệt dạng tấm ngược dòng

    Bộ trao đổi nhiệt dạng tấm ngược dòng

  • Bộ trao đổi nhiệt dạng tấm ngược dòng

    Bộ trao đổi nhiệt dạng tấm ngược dòng

  • Bộ trao đổi nhiệt dạng tấm

    Bộ trao đổi nhiệt dạng tấm

  • Bộ trao đổi nhiệt tổng dạng tấm

    Bộ trao đổi nhiệt tổng dạng tấm

  • Bộ trao đổi nhiệt bánh xe

    Bộ trao đổi nhiệt bánh xe

  • Đơn vị bánh xe thu hồi nhiệt

    Đơn vị bánh xe thu hồi nhiệt

  • Bộ trao đổi nhiệt ống hút ẩm loại U

    Bộ trao đổi nhiệt ống hút ẩm loại U

  • Bộ trao đổi nhiệt ống nhiệt

    Bộ trao đổi nhiệt ống nhiệt

  • Máy thông gió loại bỏ khói mù áp suất dương dòng đơn

    Máy thông gió loại bỏ khói mù áp suất dương dòng đơn

  • Máy thông gió thu hồi nhiệt toàn phần DC-Inverter

    Máy thông gió thu hồi nhiệt toàn phần DC-Inverter

  • Máy thông gió thu hồi nhiệt hoàn toàn theo tiêu chuẩn / loại bỏ khói mù

    Máy thông gió thu hồi nhiệt hoàn toàn theo tiêu chuẩn / loại bỏ khói mù

  • Hệ thống không khí trong lành kiểu tủ Samrt

    Hệ thống không khí trong lành kiểu tủ Samrt

  • Hệ thống cấp gió tươi Samrt treo tường

    Hệ thống cấp gió tươi Samrt treo tường

  • Thiết bị thu hồi nhiệt tổng gắn trên trần cỡ trung bình

    Thiết bị thu hồi nhiệt tổng gắn trên trần cỡ trung bình

  • Đơn vị thu hồi nhiệt tổng theo chiều dọc

    Đơn vị thu hồi nhiệt tổng theo chiều dọc

  • Thiết bị thu hồi nhiệt gắn trần cỡ trung

    Thiết bị thu hồi nhiệt gắn trần cỡ trung

Air Treatment Equipment from ROTER

ROTER designs, manufactures and sells air treatment equipment from one factory in Wuxi, China. The range is built around a single objective: bring fresh outdoor air into a building without paying to heat and cool it again. Products are organised into five series, and every unit can be specified as a complete packaged system or built around a ROTER-made heat recovery core.

Five product series

Series What it covers Typical applications
Heat Recovery Ventilation Plate, rotary and heat pipe heat exchangers and heat recovery wheel units Ventilation energy recovery in residential, commercial and industrial systems
Fresh Air System Total heat recovery fresh air ventilators, DC inverter units, single flow haze removal units, wall-mounted and cabinet-type smart fresh air systems Houses, hotels, schools, offices, clinics and public buildings
Commercial Air Conditioning Unit  Combined air handling units, direct expansion units, condensing exhaust-air heat recovery fresh air conditioners and modular building-block AHUs Subways, airports, stadiums, malls, factories and cleanrooms
Air Conditioning Terminal  Long-range jet air handling units, cabinet-type air handling units and fan coil units Terminal equipment inside conditioned zones
Dehumidifier Wheel desiccant units, low dew point units, industrial, ceiling-mounted, drying, wine cellar and freeze-type dehumidifiers Warehouses, cold chain, museums, laboratories, wineries and industrial drying

Five series, one manufacturing base

Because ROTER integrates product design, production and sales rather than assembling bought-in parts, the heat exchanger core, the rotary desiccant rotor, the aluminium foil process, the fan, the control board and the cabinet are all produced under the same quality system. That is what makes the range consistent: a fresh air ventilator, an air handling unit and a dehumidifier from ROTER share the same approach to heat recovery efficiency, sealing and air leakage.

How to start a specification

  • Start from the air, not the equipment. Airflow, outdoor design conditions, the required indoor temperature and humidity band, and the noise limit at the occupied position determine which product family applies.
  • Then pick the recovery type. Plate cores for the lowest pressure drop and cleanest separation, rotary cores where the highest sensible and latent recovery is needed, heat pipe cores where condensate-free operation and long life matter, desiccant wheels where humidity must go below the comfort band.
  • Finally size the airflow. Fresh air volume is normally the larger of the per-person minimum (30–50 m³/h per person for general and high-grade offices and residences, 15–25 m³/h per person for shopping malls) or the air-change requirement (1–2 ACH for general rooms, 2–4 ACH for computer rooms).

Every product page in this section lists the technical parameters and the scenarios each unit is built for. If a project needs a configuration outside the standard range, send the requirement and the engineering team will propose a build to specification.

Mẫu yêu cầu

Chúng tôi sẽ trả lời qua email trong vòng 24 giờ. Vui lòng giữ thông tin liên lạc của bạn có sẵn.