Các sản phẩm
  • Thiết bị điều hòa không khí trong lành thu hồi nhiệt khí thải ngưng tụ

    Thiết bị điều hòa không khí trong lành thu hồi nhiệt khí thải ngưng tụ

  • Bộ điều hòa không khí mở rộng trực tiếp

    Bộ điều hòa không khí mở rộng trực tiếp

  • Bộ xử lý không khí kết hợp

    Bộ xử lý không khí kết hợp

  • Hệ thống lọc không khí trong lành thông minh kỹ thuật số

    Hệ thống lọc không khí trong lành thông minh kỹ thuật số

  • Bộ xử lý không khí phản lực tầm xa

    Bộ xử lý không khí phản lực tầm xa

  • Bộ xử lý không khí kiểu tủ

    Bộ xử lý không khí kiểu tủ

  • Đơn vị cuộn dây quạt

    Đơn vị cuộn dây quạt

  • Hệ thống lọc hút ẩm loại bỏ khói mù một luồng không khí trong lành

    Hệ thống lọc hút ẩm loại bỏ khói mù một luồng không khí trong lành

  • Hệ thống lọc hút ẩm loại bỏ khói mù dòng chảy kép thu hồi nhiệt hoàn toàn bằng không khí trong lành

    Hệ thống lọc hút ẩm loại bỏ khói mù dòng chảy kép thu hồi nhiệt hoàn toàn bằng không khí trong lành

  • Máy hút ẩm công nghiệp

    Máy hút ẩm công nghiệp

  • Máy hút ẩm gắn trần

    Máy hút ẩm gắn trần

  • Máy hút ẩm sấy khô

    Máy hút ẩm sấy khô

  • Máy hút ẩm loại đông lạnh nhiệt độ thấp

    Máy hút ẩm loại đông lạnh nhiệt độ thấp

  • Máy hút ẩm hầm rượu

    Máy hút ẩm hầm rượu

  • Đơn vị nhiệt độ và độ ẩm không đổi loại tủ

    Đơn vị nhiệt độ và độ ẩm không đổi loại tủ

  • Thiết bị hút ẩm không khí trong lành tất cả trong một

    Thiết bị hút ẩm không khí trong lành tất cả trong một

Air Treatment Equipment from ROTER

ROTER designs, manufactures and sells air treatment equipment from one factory in Wuxi, China. The range is built around a single objective: bring fresh outdoor air into a building without paying to heat and cool it again. Products are organised into five series, and every unit can be specified as a complete packaged system or built around a ROTER-made heat recovery core.

Five product series

Series What it covers Typical applications
Heat Recovery Ventilation Plate, rotary and heat pipe heat exchangers and heat recovery wheel units Ventilation energy recovery in residential, commercial and industrial systems
Fresh Air System Total heat recovery fresh air ventilators, DC inverter units, single flow haze removal units, wall-mounted and cabinet-type smart fresh air systems Houses, hotels, schools, offices, clinics and public buildings
Commercial Air Conditioning Unit  Combined air handling units, direct expansion units, condensing exhaust-air heat recovery fresh air conditioners and modular building-block AHUs Subways, airports, stadiums, malls, factories and cleanrooms
Air Conditioning Terminal  Long-range jet air handling units, cabinet-type air handling units and fan coil units Terminal equipment inside conditioned zones
Dehumidifier Wheel desiccant units, low dew point units, industrial, ceiling-mounted, drying, wine cellar and freeze-type dehumidifiers Warehouses, cold chain, museums, laboratories, wineries and industrial drying

Five series, one manufacturing base

Because ROTER integrates product design, production and sales rather than assembling bought-in parts, the heat exchanger core, the rotary desiccant rotor, the aluminium foil process, the fan, the control board and the cabinet are all produced under the same quality system. That is what makes the range consistent: a fresh air ventilator, an air handling unit and a dehumidifier from ROTER share the same approach to heat recovery efficiency, sealing and air leakage.

How to start a specification

  • Start from the air, not the equipment. Airflow, outdoor design conditions, the required indoor temperature and humidity band, and the noise limit at the occupied position determine which product family applies.
  • Then pick the recovery type. Plate cores for the lowest pressure drop and cleanest separation, rotary cores where the highest sensible and latent recovery is needed, heat pipe cores where condensate-free operation and long life matter, desiccant wheels where humidity must go below the comfort band.
  • Finally size the airflow. Fresh air volume is normally the larger of the per-person minimum (30–50 m³/h per person for general and high-grade offices and residences, 15–25 m³/h per person for shopping malls) or the air-change requirement (1–2 ACH for general rooms, 2–4 ACH for computer rooms).

Every product page in this section lists the technical parameters and the scenarios each unit is built for. If a project needs a configuration outside the standard range, send the requirement and the engineering team will propose a build to specification.

Mẫu yêu cầu

Chúng tôi sẽ trả lời qua email trong vòng 24 giờ. Vui lòng giữ thông tin liên lạc của bạn có sẵn.